 | |||
| This is the radiator duct panel, it's bent. |
 |
| This is the front of the car without a radiator duct panel, and a bunch of other things, well pretty much everything! |
 |
| The fenders are back on to help align everything. |
 |
| A new tool! After making some jig fixtures, I used the new hydraulic puller to help fit the fenders and get the correct gap for the hood, things are starting to come together. |
 |
| Duct panel getting fitted. |
 |
| Hood aligned. If a hover craft were a thing, I would leave it just like this. |
 |
| Here is the bonnet lock platform in place after welding, it is maintaining the hood width gap. |
 |
| Now the duct panel gets welded in. The end. This may look simple, but it was much more complicated than even the sill panels because there were so many critical panels to align. The platform brace still needs to be installed, but that can wait. |
No comments:
Post a Comment